Light Animations

Docking (Before pairing)
The Pryme line will rise from the bottom to top and back down again.

 

Charging/Ready To Pair (Before pairing)
The top light will blink rapidly, this means that your Pryme Vessyl is looking for a connection and is ready to pair.

 

Charging (After pairing)
The top light will pulse or "breathe" slowly while on the charging coaster.

 

Activate the display (Before pairing)
The Pryme line will rise from the bottom to the top and the top light will blink rapidly, letting you know it's looking for a connection and is ready to pair.

 

Activate the display (Paired, Not at Pryme)
The Pryme line will rise from the bottom up to your current Pryme level. The top light will shine white and remain solid.

 

Activate the display (Paired, At Pryme)
The Pryme line will rise from the bottom up to the top Pryme light. The top light will turn blue when you are at your Pryme.

 

Turn off Pryme Vessyl (Power down)
After holding the reset button for approximately 3 seconds, the middle of the Pryme line will illuminate. Release the reset button during this animation to turn your Pryme Vessyl off. You can confirm your Pryme is powered down by attempting to activate the display again.

 

Full Reset (Factory Settings)
You should see 3 animations occur during a factory reset, where you hold the power button in for 15 seconds. After 3-4 seconds, the middle of your Pryme line will illuminate. At 7-8 seconds, the light will rise up from the bottom and fall back down to the bottom. At 13-14 seconds, the light will rise up from the bottom and continue rising into the top light. Once you see this third and final animation, a reset has occurred.

Have more questions? Submit a request

Have more questions?

Contact Us